How Much Does Brick Wall Repair Cost? [2025 Data]

How Much Does Brick Wall Repair Cost? [2025 Data]

By Contractors Booklist Editorial Team • Oct 30, 2025 • 10 min

The cost to repair a brick wall averages $1,702, typically ranging between $798 and $2,615 depending on the level of repair and current brick condition.

Highlights

• Labor for brick wall repair ranges from $20 to $40 per square foot.
• You'll have to budget for the disposal of old bricks and mortar, and renting a dumpster costs $300 to $500 on average.
• If you plan to make any modifications during the repair, you'll likely need to pay for a building permit.
• Repairing mortar can cost as little as $300, crack repair starts at $500, and a full restoration costs at least $5,000.

Whether it covers the whole exterior of your home or appears only on an accent wall within, brick offers a classic, elegant look and comes with the guarantee of longevity. With proper maintenance and care, brick can last 100 or more years. To repair a brick wall and preserve its look and life, expect to pay between $798 and $2,615. The final cost is determined by whether you're dealing with a few cracks or a full restoration.

How Much Does It Cost to Repair a Brick Wall per Square Foot?

Masons typically charge about $20 to $40 per square foot, depending on the extent of the damage, the quality of the brick, and the structure's integrity. Some masons have a minimum fee, which is usually between $200 to $400.

Wall Size per Square Foot	Average Cost
50	$1,000–$2,000
100	$2,000–$4,000
200	$4,000–$8,000
300	$6,000–$12,000

Brick Wall Repair Cost Factors

The cost of repairing a brick wall depends on many factors, primarily the condition of the existing brick and the level of repair needed. Depending on the cost of the repair and the type of project, you may want to consider the cost of a new brick wall instead.

Brick Type

Different areas of your home may use different kinds of brick. For instance, the brick used on your fireplace might be made of appropriately named fire bricks, while an exterior wall of your home is likely made of brick veneer. Generally speaking, the more expensive the brick, the more repairs will cost per square foot. If your project requires a lot of bricks, your mason may be able to secure a bulk order discount.

Extent of Damage

The amount of brick that needs to be repaired or replaced will factor into the final cost. A minor repair (like a small crack) will cost more than a more severe one (like water damage). Even if you only have a small area that needs to be repaired, have it addressed immediately; minor problems with brick walls can turn into big problems very quickly.

Wall Height

Repairs higher than 10 feet off the ground will cost more than those below due to the specialized tools and experience needed. Expect a 10% to 25% increase for hard-to-reach repairs where the mason may require the use of scaffolding.

Disposal of Materials

For larger repair projects that require removing parts of a brick wall, you may need to pay for the cost of a dumpster rental or disposal fees. Bricks cannot be tossed in a normal residential trash bin and most local governments require you to dispose of bricks at certified recycling centers.

Permits

You may be required to apply for a permit depending on the size of your brick repair project. Most local governments won't require a permit if you're repairing or replacing components of existing work with similar materials (meaning replacing a brick in a brick wall likely won't need a permit). Other more involved projects that require special modifications or exceed a certain dollar amount may require a permit. It's a good idea to talk to your licensed masonry contractor about permitting needs before starting the project.

Project Cost by Type of Repair

The level of repair is the largest cost factor for this type of job. The cost of removing and replacing a few bricks is much different from fully restoring a brick wall.

Repair Type	Average Cost
Cracks	$500–$1,000
Mortar	$300–$500+
Spalling	$900–$20,000
Bowing	$7,500–$40,000
Full restoration	$5,000–$20,000

Cracks

Expect to pay $500 or less to repair some cracks in 10 or fewer bricks. If several areas are cracked, the cost will likely run between $750 and $1,000.

Mortar Repair

To remove old, cracked mortar and fill in the spots with fresh mortar, your mason will employ either tuckpointing or repointing. Tuckpointing is when you remove a part of the aging mortar, fill in the joints with new mortar that is colored the same—or close—to the color of the brick, and then apply putty in a contrasting color in the center of the joint. Repointing is replacing the old mortar with new mortar. Mortar repair costs $10 to $20 per square foot; for a 20-square-foot wall, expect to spend $300 to $500.

Spalling Repair

Spalling refers to the appearance brick gets when it has been exposed to years of colder, harsher climates, poor installation, non-breathable sealants, or high-pressure water.

To fix spalling bricks, a mason will need to remove and replace them. This can cost $900 to $1,200 on average (if there are only a few sections to repair) but can run as high as $20,000 (rebuilding large sections of a wall).

Bowing Brick Wall Repair

If your brick wall is bowing for whatever reason—like water damage or foundation issues—you should address it immediately, as it can lead to structural failure. These repairs can be costly, ranging from $7,500 to $40,000 for 100 square feet. You may have to factor in additional costs to address the source of the problem, such as:

• Tree root removal: If tree roots are pushing up against your foundation, causing your wall to bow, you'll need to get them removed, which will cost $400 to $1,200.
• Soil pressure: Clogged gutters can lead to a buildup in soil pressure; cleaning your gutters will cost you $120 to $225.
• Structural issues: You'll need to consult with a local structural engineer about bowing resulting from a large movement, such as a settling foundation or disruption to other supportive elements.

Full Restoration

A full restoration project, typically done on historic homes, includes removing spalling bricks, fixing cracks, and replacing other bricks, if necessary. Given the extent of this work, expect to pay $5,000 to $20,000 or more for the total project.

Repairing a Brick Wall Yourself vs. Hiring a Pro

Brick is one of the most durable materials out there, and when cared for and repaired correctly, it can last a lifetime (and often much longer). Because masonry requires years of apprenticeship and training—and often includes structural elements—brick repair is best left to a masonry professional. A mason will bring the expertise necessary to repair your brick wall. When hiring a mason, make sure they are licensed, insured, and bonded.

It is possible to repair a brick wall yourself to save some money. Your main expense for minor brick wall repairs will be the mortar, which will cost about $30 to cover 75 square feet, as well as the tools and masonry materials necessary to complete the job. Keep in mind that working with mortar is a complex job, requiring a lot of skill to mix, apply, and cure the material. Mistakes during the DIY process could result in a brittle structure that damages surrounding bricks.

At Contractors Booklist, we connect homeowners with trusted masonry contractors who are licensed, insured, and experienced in brick wall repair. Our network of vetted professionals can help you get accurate estimates for your repair project and ensure the work is done correctly to preserve your brick wall's integrity and appearance.

Ready to repair your brick wall? Start your project with Contractors Booklist today and get connected with qualified masonry contractors in your area.